OUR BUSINESS


AUDIT SERVICES
CONSULTING SERVICES
Surge Protective Device (Spd) is the engineering process JEF Techno uses to protect structures, equipment and personnel, delivered in compliance with IS/IEC 62305.
Surge Protective Device (Spd) reduces the risk of equipment damage, downtime, fire and injury caused by lightning strikes, earth faults or transient overvoltages in industrial and commercial facilities.
In India, surge protective device (SPD) follows IS/IEC 62305 and IS 3043; internationally JEF Techno also aligns with NFPA 780, IEEE 80 and IEC 62561 depending on the project location.
Cost depends on facility size, soil/site conditions and scope; JEF Techno provides a free site assessment and itemized quote before starting surge protective device (SPD).
A typical surge protective device (SPD) project takes 2-6 weeks from site survey to commissioning, depending on facility size and site access.
Factories, warehouses, data centers, substations, telecom towers, solar plants, commercial buildings and any facility handling critical or high-value equipment.
JEF Techno recommends annual inspection of Type 1 Type 2 Type 3 SPD, with a full re-assessment every 3-5 years or after any major structural change.
Yes — surge protective device (SPD) is commonly retrofitted; JEF Techno's team conducts a site survey to adapt the design to existing structural and access constraints.
Surge Protective Device (Spd) focuses on surge protective device (spd) product range — type 1, type 2 and type 3 — for power, signal, instrumentation, ethernet and telecom lines, selected and coordinated as per iec 61643, while Type 1 Type 2 Type 3 SPD addresses a related but distinct engineering requirement — our consultants advise which (or both) your facility needs.
Yes, JEF Techno delivers surge protective device (SPD) across the Middle East (UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain) and Southeast Asia (Singapore, Malaysia) in addition to India.
A compliance report, test certificates, as-built drawings and a maintenance schedule are provided on completion.
Many jurisdictions require surge protective device (SPD) for industrial, high-occupancy or hazardous-area buildings under local fire/electrical codes — JEF Techno can confirm the exact requirement for your facility's location.
Industry-standard tools such as ETAP, CDEGS/XGSLab and proprietary risk-assessment calculators aligned to IS/IEC 62305 are used for simulation and design.
Manufacturing, oil & gas, data centers, warehousing/logistics (including clients such as Amazon), EPC/construction (L&T), agrochemicals (Syngenta), renewable energy and utilities.
JEF Techno typically quotes per site/facility based on scope, with fixed-fee options available for multi-site or annual maintenance contracts.
Surge Protective Device (Spd) is the engineering process JEF Techno uses to protect structures, equipment and personnel, delivered in compliance with IS/IEC 62305.
Surge Protective Device (Spd) reduces the risk of equipment damage, downtime, fire and injury caused by lightning strikes, earth faults or transient overvoltages in industrial and commercial facilities.
In India, surge protective device (SPD) follows IS/IEC 62305 and IS 3043; internationally JEF Techno also aligns with NFPA 780, IEEE 80 and IEC 62561 depending on the project location.
Cost depends on facility size, soil/site conditions and scope; JEF Techno provides a free site assessment and itemized quote before starting surge protective device (SPD).
A typical surge protective device (SPD) project takes 2-6 weeks from site survey to commissioning, depending on facility size and site access.
Factories, warehouses, data centers, substations, telecom towers, solar plants, commercial buildings and any facility handling critical or high-value equipment.
JEF Techno recommends annual inspection of Type 1 Type 2 Type 3 SPD, with a full re-assessment every 3-5 years or after any major structural change.
Yes — surge protective device (SPD) is commonly retrofitted; JEF Techno's team conducts a site survey to adapt the design to existing structural and access constraints.
Surge Protective Device (Spd) focuses on surge protective device (spd) product range — type 1, type 2 and type 3 — for power, signal, instrumentation, ethernet and telecom lines, selected and coordinated as per iec 61643, while Type 1 Type 2 Type 3 SPD addresses a related but distinct engineering requirement — our consultants advise which (or both) your facility needs.
Yes, JEF Techno delivers surge protective device (SPD) across the Middle East (UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain) and Southeast Asia (Singapore, Malaysia) in addition to India.
A compliance report, test certificates, as-built drawings and a maintenance schedule are provided on completion.
Many jurisdictions require surge protective device (SPD) for industrial, high-occupancy or hazardous-area buildings under local fire/electrical codes — JEF Techno can confirm the exact requirement for your facility's location.
Industry-standard tools such as ETAP, CDEGS/XGSLab and proprietary risk-assessment calculators aligned to IS/IEC 62305 are used for simulation and design.
Manufacturing, oil & gas, data centers, warehousing/logistics (including clients such as Amazon), EPC/construction (L&T), agrochemicals (Syngenta), renewable energy and utilities.
JEF Techno typically quotes per site/facility based on scope, with fixed-fee options available for multi-site or annual maintenance contracts.